Highlights

• The Dirtmag removes both ferrous and non-ferrous impurities continuously in a sealed hydronic heating and cooling system
• A large brass body low velocity chamber reduces the frequency of cleaning, which can also be done while the system is in operation
• A removable magnetic ring and large drain valve make the Dirtmag quick and easy to flush collected dirt and ferrous impurities, including magnetite
• A powerful removable external magnetic ring attracts ferrous impurities with 2 1/2 times the removal performance of a standard dirt separator
• Dirtmag will separate dirt particles down to 5 um (0.2 mil) and upto 100% of ferrous impurities during multiple passes of system fluid
• Low head losses reduces pumping demands compared to typical Y-strainers

Specifications

Mid-City Product ID: 375934

Manufacturer: Caleffi

Manufacturer Part Number: 546354AM

UPC: 8016615659856

Additional Information: Top End Connection 1/2 Inch Threaded; Material Brass (Drain Valve, Dirt Collection Chamber and Top Plug), EPDM (Hydraulic Seal), Neodymium (Magnet); Particle Separation Capacity 0.2 Mil

Applicable Standard: ISO 9001-2015, FM 21654, BSI, ICIM, UKAS

Body Material: Brass

Brand: Caleffi

Connection Type: Sweat

Dimensions: 9-1/4 in H x 6-1/8 in Dia

End Connection: Soldered x Soldered

Flow Rate: 39 GPM

Inclusions Features: Magnet

Material: Brass

Nominal Size: 2 Inch

Pressure Rating: 150 PSI

Product Features: Pipe Velocity Slows by a Factor of 9 as Fluid Enters Chamber; Unlike Strainers Which Clog and Cause Increased Pressure Drop, Debris is Removed from the Flow Path and Captured in Lower Bowl Area, Simplifying and Reducing Frequency of Cleaning; Unique Dirt Separation Mesh Uses Deflection and Gravity to Separate Dirt Particles as Small as 5 Microns from Flow Stream; Concentric Pattern Design has Low Flow Resistance Resulting in 85% Less Pressure Drop Compared to Same Size Y-Strainer; Magnetic Field Attracts and Captures Microscopic Ferrous Oxide Impurities; Removes 2-1/2 Times the Ferrous Oxide Compared to Other Dirt Separators; Opening Purge Valve and Removing Magnetic Ring Releases Captured Magnetic Impurities and Purges All Dirt without Shutting Down the System; Inch NPT Top Provides Convenient Chemical Additive Dosing Port; All Components Highly Resistant to Hydronic Chemical Additives or Unstable PH Fluid

Prop 65 Warning: Yes

Series: 5463

Standards/Approvals: NA5465 and NA5465M designed and built in accorance with section VIII, Division 1 of the ASME Boiler and Pressure Vessel Code and tagged and registered with the National Board of Boiler and Pressure Vessel Inspectors, ISO 9001, FM21654 Certified

Temperature Rating: 32 to 250 Deg F

UNSPSC: 40161700