1 in clearance horizontal or vertical support provides support to 3 and 4 in Dia Saf-T Vent EZ Seal Plus systems with a 300 deg F maximum flue gas temperature. When any horizontal run of Saf-T Vent EZ Seal Plus extends for more than 6 ft, a horizontal support must be installed. Subsequent supports are required after every additional 6 ft and every elbow and tee. Never drill or screw through the Saf-T Vent EZ Seal Plus conduit. The 1 in clearance may be achieved only when the vent is not fully enclosed there may be combustible material on a maximum of 3 sides. This support is not recommended for use in Canada unless additional provisions are made to insure that proper clearances.
Mid-City Product ID: 403217
Manufacturer: Heatfab
Manufacturer Part Number: 016110
Applicable Standard: UL 1738, ULC S636, UL (Canada and US)
Brand: Heatfab
Dimensions: 4-1/2 in Dia
Item: Support
Material: AL 29-4C Stainless Steel
Product Features: Provides Support to 3 Inch or 4 Inch Diameter Saf-T Vent EZ Seal Plus systems with a 300 Deg F maximum flue gas temperature; When any horizontal run of Saf-T Vent EZ Seal Plus extends for more than 6 feet, a horizontal support must be installed; Subsequent supports are required after every additional 6 feet an every elbow and tee, Never drill or screw throught the Saf-T Vent EZ Seal Plus conduit
Size: 1 Inch Clearance x 4.5 Inch Diameter (Hose Clamp)
Temperature Rating: 300 deg F
Type: Horizontal/Vertical
UNSPSC: 40170000
Used On Item: Single Wall Special Gas Vent
Contact us for more information on our products and services!